Sometimes, the best opportunities present themselves at unexpected times and in the strangest places.
Last year, I was attending a New Year’s Eve concert when one of my agents called. She apologized profusely for her timing, but a long time client really needed to know my availability. It only took a few minutes to go over my schedule. Twenty-four hours later, the job was booked; the first one of 2013.
A few days ago, I took a trip to Atlanta. I’d barely settled into my hotel room when a Polish producer contacted me. He wanted to know if I was interested in playing a part in a new video game. He sent along an audition script, and said his team would love to listen to my voice within the hour.
I enjoy creating all kinds of characters, but for some reason I haven’t broken into the wonderful world of gaming yet. This was a chance I couldn’t afford to miss.
Fortunately, I had come prepared. In less than ten minutes, I transformed my room at the Westin into a mini-recording studio.
HARLAN HOGAN’S PORTA-BOOTH®
Years ago, VO veteran Harlan Hogan had an ingenious idea. What if he were to line a collapsible Whitmor Cube with acoustic foam and place a microphone inside? Would that be enough to tame the unruly reflections of a hollow-sounding hotel room?
Even though this foam-filled contraption cannot keep unwanted noise out, placing the microphone inside a small treated space can indeed make a recording sound less boomy. In a moment I’ll share some sound samples with you.
Over the years, the Porta-Booth® has had a few incarnations, and it has found its way to roaming reporters, television commentators and traveling voice actors.
I own the Porta-Booth® Plus. It only weighs four and a half pounds and it comes with a free lightweight storage bag with plenty of room for a microphone, shock mount, preamp and a desk stand. The Auralex® foam lining the walls, keeps everything that’s sandwiched inside safe from the rough hands of airport handlers.
The Porta-Booth® Plus is made out of strong rip stop nylon, and has two parts: four supporting walls which are connected, and a separate back wall which can be attached with a zipper. Trust me: you won’t need instructions to put one and two together. Once you open the added two-way rear zipper, you can easily stick a shotgun mic through the slot, or a microphone cable.
Here’s another thing I like about this booth. When you’re not on the road, you can hang the strip of four connected Auralex® squares on one of the walls in your home studio for additional acoustic treatment. You can even rest these squares on your monitors to create a reflection screen.
CHALLENGES
So, is the Porta-Booth® Plus as easy to use as it is to set up? Yes and no. As with many new things in life, it takes getting used to. Let’s talk about travel first.
Harlan’s website Voiceover Essentials claims that the Porta-Booth® Plus “fits in most carry-on luggage”. Well, it definitely does not fit in a standard Samsonite carry-on upright that many people are using these days (see photos below). So, I carried the Porta-Booth® Plus separately.
I had planned on putting it in the overhead compartment, but because we were flying on a relatively small airplane, it didn’t fit and it had to be stored with other luggage. Thankfully, nothing was damaged when I got the Porta-Booth® back in Atlanta, but on the flight home, both straps of the carrying bag were ripped off, leaving four holes.
I should have read the disclaimer on Harlan’s website:
“It is not intended to be used as a travel bag and is not covered under your warranty. A heavy-duty traveling bag is under development and will be available soon!”
Without this heavy-duty traveling bag, I don’t think the Porta-Booth® Pro is ready for air travel, unless you store it in a sturdy suitcase.
INSIDE THE BOX
When I got my very first model, I thought I had to stick my head inside the Porta-Booth® to talk into the microphone. Considering the size of my head, that would have been very quite uncomfortable.
Fortunately, that’s not necessary. As long as you turn your mouth toward the grille of the mic and you stay fairly close to the booth, you should be fine.
One of the problems I did experience had to do with script placement. A paper script can block the opening of the Porta-Booth® if you hold it in your hand. Since the assembled space is quite small (16 inches high x 15 inches wide and 16 inches deep) it’s not easy to put the script inside either. Unless you bring a reading light, it’s also hard to see your lines.
The best way around this is to read your script from a Smart phone or a tablet placed inside the Porta-Booth®.
By now you’re probably wondering what Harlan’s portable recording booth sounds like. Does it deliver as promised? Allow me to first introduce the other elements in my portable recording chain.
MICROPHONE
In my home studio I use a Microtech Gefell M903 Ts condenser microphone. It retails for $1,784.72. I don’t know about you, but I’m not comfortable taking such an expensive mic on the road. That’s why I wanted to find a sturdy replacement that wouldn’t break the bank.
Because low-frequency rumble is a common problem in less than ideal acoustic situations, my travel mic had to have a high-pass filter. Such a filter also curbs the bass-boosting proximity effect, which can easily occur when you’re getting close to the microphone. After a two-week search, I found my mic.
Let’s listen to my two microphones. You’ll notice that they have different personalities. Which one do you like better: A or B? Can you tell which one is the Gefell?*
Without telling you which is which, I can reveal that my travel mic is a previously loved AKG C 3000 B. I bought it online from Guitar Center for under ine hundred dollars. This thing is built like a tank, it looked like it was never used and it came with a shock mount. Listen to the sample again, and tell me if the difference in sound quality is worth $1700,72.
PREAMPLIFIER
In order to bring a condenser microphone signal up to line level, you need a preamp. My favorite travel gadget is the MicPort Pro made by CEntrance. It’s a portable preamp with a built-in 24bit/96kHz, A/D converter. It gives your mic 48V phantom power and it has a headphone amp for zero latency monitoring. It is powered from the USB port.
It took me a while before I finally found a portable pop filter. Most of these things take up too much space and the ones with a big clamp can be heavy. On the road I use the Pop Guard made by WindTech ($29.95). It weighs almost nothing and it slides neatly over most side address microphones.
I’m also happy with the On-Stage folding desk stand. My AKG mic isn’t exactly light, so I had to get a reliable metal tripod stand. The die-cast clutch adjusts in height from 4.25″ – 6.75″. For the mic itself I bought a padded microphone bag.
FATAL MISTAKES
Three big blunders almost ruined the recording day for me. Number one: for monitoring my audio, I relied on the small earbuds that came with my iPhone 4. Back home I immediately replaced them with the very comfortable Sennheiser PX 100-II headphones that can be folded up.
Secondly, even though I had asked for a quiet hotel room away from the elevator, we ended up in a gorgeous corner unit with windows on two sides. The 14th floor view was spectacular, but so was the traffic noise that never seemed to stop. Next time, I’ll make sure to inspect the room first, before unpacking.
To get away from the noise, I wanted to move my booth and computer as far from the windows as possible, but the quietest spot in the room had no electrical outlets that were within reach. I should have brought an extension cord, but because I hadn’t, I ended up placing everything on the desk by the window. Have a listen:
The question is: did placing my microphone inside the Porta-Booth® Plus make a huge difference?
The Porta-Booth® Plus definitely tamed some of the reflections, but I would be embarrassed to send this audio clip to prospective clients. With the help of some clever plug-ins and other tricks, I was able to turn the audio into this:
Am I happy with the end result? Not really. Most of the background noise is gone, but it sounds strangely distorted. Audio engineering is part art, part science and boy, do I have a lot to learn!
SHOWING WHAT YOU’VE GOT
Every audition is an audio business card. It’s proof of the level of professionalism a client can expect from you.
You either show it, or you blow it.
Remember: most clients won’t give you a second chance to make a first impression. Not even a producer in Poland.
So, what was I to do? His animation studio was expecting my demo within the hour.
Well, I ended up recording his audition script that day, and I used some artificial sweeteners to make it sound okay. But I told him in my email that this was recorded in a hotel room, and I sent him a demo I had recorded in my studio, so he could hear what I was capable of.
A day later, and in spite of my best efforts to come up with a decent recording on the road, I was hired.
Life can be a mysterious road trip.
Some say that it’s the destination that really matters.
How you get there, is not always important.
Live and learn, my friends.
Live and learn.
Paul Strikwerda ©Nethervoice
* The first microphone was the Gefell. Number two was the AKG.
PS The Porta-Booth® Plus Carry-On bag has arrived! It’s strong. It’s sturdy, and it has two side pockets for your microphone, desk stand and cables. With this addition, the Porta-Booth® Plus is now ready for the road and I can give it my unofficial seal of approval.
Send to Kindle
