To me this is a no-brainer. It’s my iPhone 5.
It goes wherever I go.
Thanks to audio editor Twisted Wave (one of MacLife’s 29 Web Apps We Can’t Live Without), it’s also my portable recording studio.
The iPhone 5 comes with three microphones. One in the front, one on the back around the camera area, and one on the bottom. Having three mics improves the sound quality of phone calls, Skype sessions, and FaceTime. However, using those microphones for voice-over recordings is not such a good idea. Here’s why.
1. The iOS has automatic gain control, regulating your input signal. To make sure the audio from the built-in microphones doesn’t distort, the gain for the mic preamp is set very low. As a VO-pro, you want to be able to control the gain yourself for the best signal-to-noise ratio.
2. Apple automatically applies a High Pass audio filter that only lets frequencies over a certain threshold get by. The frequency of the data in your voice is compressed around the mid-range and it lacks bass. This ensures that your plosives won’t pop during a call, and it makes calls more intelligible. It also means your voice will sound thinner and not as rich.
3. As each of the three microphones picks up the sound coming from its respective direction, an internal processor analyzes the sound data, loaded with the location and type algorithm of the mics, and processes the sound, in part to eliminate background noises. Again: all this processing is great for making phone calls, but it’s not ideal for recording unsweetened voice-overs.
Here’s a quick tip from Thomas Thiriez, the developer of Twisted Wave:
By default, Twisted Wave does not bypass the iOS processing, but if you go to the preferences in TW (tap the button in the lower right hand corner of the document list), you will have the option to disable it.
Of course there are a number of external microphones on the market that can be plugged into an iPhone, such as the RØDE iXY and the TASCAM iM2X. Both are for stereo recording and are made for the old 30-pin dock connector that was replaced by the Lightning connector. In order to use these mics on the iPhone 5, you’d need a Lightning to 30-pin adapter.
The original Apogee MiC (introduced in 2011) also needs such an adapter if you own an iPhone 5, and it can also be connected to a Mac device via USB. The MiC is a compact condenser featuring 24-bit analog-to-digital conversion at 44.1/48kHz. It resembles a studio microphone and comes with adjustable gain control. Reviewing the Apogee MiC for Macworld, Christopher Breen said:
Where I found MiC lacking was with voice—specifically a speaking voice. It produces very clean results, but it lacks bottom end. Try as I might, I just couldn’t get a baritone-FM-DJ timbre out of this microphone. When I moved within a few inches of the mic’s capsule the mic rumbled, even with the gain turned down, and plosives because a problem.
When I backed off and turned up the gain, the mic’s sound was bright, but didn’t pick up my voice’s more sonorous tones. If you’re accustomed to “working” a mic by changing the distance between it and your mouth you’ll find it difficult to do with this microphone.
I don’t agree with Breen. I have enthusiastically adopted the MiC as my favorite iOS voice-over travel solution.
At the beginning of 2013, Apogee came out with the MiC 96k. It is optimized for the latest Apple iOS devices, including the ability to record in pristine fidelity – up to 24-bit/96kHz. It has a direct connection with Lightning or 30-pin iOS devices such as the iPhone, iPod touch and iPad, as well as a USB connection to Mac.
This year, Zoom came out with the iQ5, a stereo microphone with a Lightning connector that works in conjunction with iOS applications. The iQ5 (currently unavailable) captures uncompressed 16-bit 44.1 kHz audio (the RØDE iXY offers up to 24-bit/96kHz resolution).
Did you know that there’s even a shotgun mic for smartphones, tablets and DSLR camera’s? It’s the MicW iShotgun microphone and it comes with a windscreen, a shoe mount and a mini boom pole. Reviewers agree that it works quite well, but that this sensitive mic is rather susceptible to handling noise.
USING YOUR OWN MIC
What if you could simply connect your own studio condenser or dynamic microphone to your iPhone and use your favorite recording software to capture the audio? That’s the idea behind the MicConnect made by Griffin Technology. It’s a small, portable microphone interface that uses a 1/8 inch (3.5 mm) jack to plug into your phone’s headphone jack (or iPad).
When needed, two AA batteries will supply +48V phantom power. On the side of the MicConnect you’ll find a gain adjustment wheel and there’s also a headphone output for monitoring. Griffin was kind enough to send me a MicConnect for review. Before I let you listen to a sample recorded with this device, here’s what I sound like using only the iPhone 5 internal microphones:
It’s probably best if you listen to these recordings on your headphones. Now, let’s compare what we just heard to the recording I made with the Griffin MicConnect. The WAV 16 bits, 48,000 Hz audio was converted to MP3.
The iRig PRE is very similar to the MicConnect. Both devices allow you to plug any type of XLR microphone into an iPhone or an iPad using the headphone jack. There are differences.
The MicConnect retails for $39.99 and Amazon sells the iRig PRE for $34.49. The MicConnect is only compatible with Apple devices. The iRig PRE interface also works with many Android devices. iRig PRE owners can download a free audio recorder & editor, as well as VocaLive Free, a live vocal effects processor.
And now it’s time to listen to the iRig PRE.
I don’t know about you, but I think we have a clear winner. Let’s do a short recap so you can really hear the difference:
After testing the Griffin MicConnect, I contacted their technical department and asked them about the high level of noise. The microphone I’m using for these recordings has a self-noise level of only 7dB(A) so it couldn’t be the cause. Had they perhaps shipped me a defective device, or was this normal? Griffin told me they were inclined to think that the unit itself was not defective and that the noise I experienced was “to be expected.” Griffin’s Public Relations Director wrote:
The collective feedback that I heard from our engineers was that while they strove to make a high quality interface connection, the $39.99 price point just doesn’t match up with some of the $1K and more microphones. The expected usage scenarios were more in line with recording a garage band, practicing at home, or capturing ideas on the road. We’ve also heard from podcasters that found it quite useful for recording podcast audio.
Speaking of audio quality, it’s important to remember that both the MicConnect and the iRig PRE use an old-fashioned analog TRRS connection to connect to the iPhone and/or Android. It would be unfair to expect too much from these affordable devices. The 30-pin dock connector and the 8-pin Lightning connector carry digital signals.
It speaks for itself that a soundproof studio with high-end equipment is the best place to record pristine audio. But on the road, the best solution is the one that you carry with you.
Although the MicConnect and the iRig PRE have similar features, the iRig PRE clearly beats the MicConnect in terms of audio quality. It comes with a Velcro strip to secure the device, as well as two free apps. Best of all, it can be used for Apple and Android devices.
For under $40, it’s hard to beat.
Would I use it for anything other than a quick audition?
I’ll stick to the Apogee MiC.
Paul Strikwerda ©nethervoice
PS Be sweet. Please retweet.